7.5 HP ELECTRIC MOTOR
THREE PHASE ELECTRIC
48" h. x 29" d. x 51" w.
Weight: 955 lbs. approx.
This is two compressors and two motors in one cabinet.
The compressor block is 3 stage, air cooled, pressure lubricated, has inter coolers and after cooler, relief valves on all stages, and a multi-blade flywheel fan to provide high velocity cooling over the compressor. Standard equipment includes an auto-drain system, hour meter, high pressure shut down, carbon-monoxide visual indicator and a 4-sided enclosure, including a gauge panel.
The filtration system consists of two chambers designed to operate at 6000 PSI with a 4:1 safety factor. It is rated at 57,000 cu. ft. of air capacity at 80°F. The system uses a dryer bed to remove water in excess of dew point –65 degrees. (NFPA 1500 standard) Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air.
The minimum requirement for three-phase operation is two 50 Amp, 230 or 208 Volt connections.